Hyper_Harvest_II
Guest
JOl, Assuming that you have a concave with removable wires,check the spacing between wires on center.They should be 1 1_2"-2" on center.If they are narrower than this you need to pull every other wire.Are you running a seperator grate on lH sideIJ If so,does it have wires on 1" centers with the crossbars that support wires approx. 4" apartIJ If so,leave this as is.If you have seperator grate with wires on 1" centers and the crossbars are 1 1_2" apart,then I like to take every other crossbar and cut it loose and move it forward to acheive long narrow openings.This eliminates a lot of material going down on shoe. Hope this helps, Hyper Harvest II