t_leslie
Guest
Take it to the dealer.....it is trickyer than you might think... or at least get a copy of the overhaul instructions.. from service manual...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines Wobble box overhaul
Ohio__Steve
Guest
Call TMS Stoller Tractor 330 669 3676...he has rebuilt units reasoable and can rebuild yours..shipping is no problem except for the time factor
lblindsey
Guest
I have had luck in the past by heating the area around the threads a little then pouring WD-40 around it. As the metal cools it draws the oil in which helps getting the pulley off. Half the battle is holding the wobble box securly while trying to turn the pulley. I finally cut some holes in a large metal table in the shop so I could bolt the box down to work on it. That helped more than anything else I ever tried. Unless you are really lucky you will need a really loooong cheater pipe or a big impact wrench. Good luck