Combines 2188 unloading auger will not turn on

Redfever

Guest
Check the operation of the microswitch where the tube meets the saddle at the back of the combine. Make sure that you can hear it click when you operate the little arm with the wheel by hand.
 

crucut

Guest
i would check the other micro switch on the turret. that is the one that stops the outward travel.
 

560man

Guest
I would try replacing relays that plug in by the fuse panel to the right of the seat. They should be labeled on the underside of the panel. Ours was giving us trouble this summer, when you hit the button the chime beeped and the light came on saying it was unloading, but it wasn't. Replaced the "auger" relays, works fine now. Note that the "auger" relays control the unloading, while the "unloader" relays control the unloader swinging in and out.
 
 
Top