tbran
Guest
Ok, set the FRONT of the lower grate to .6 for CDF and .4 for std cyl when the clearance is "0" at the top of the grate. THEN set the mid, min,max little indicators to MID position. Thus the grate will be either .4 or .6 when the grate is set at the mid position. The cylinder then is set between 4-10 on the guage OUTSIDE or .4-1.0 on the overhead EIP on the R65-75 which is the same reading only the 5 series is electriclly set with a DPDT switch under the armrest. Hope this is a better explanation.