Combines BlACKNIGHTSHADE

[Pa__harvester]

If the berries are still juicy and the nightshade is thick, you can't. The only way I was ever able to do it is pull concaves up tight and speed the rotor up a little to push the goo through the concave, otherwise you'll jam the concave tight from front to back and send everything right out the back. If you have a yield monitor you'll need to clean the flow sensor when your done. Good luck!

 

[farmert]

let someone else do it or wait till spring

 

[seedman]

If you pick up any soil at all, the juice will make a mixture as hard as concrete that coats all your augers, etc. A nieghbor's vertical unloading auger was gummed up so bad that the drive broke. They removed the top horizontal auger and tried in vain to pull the short vertical auger up and out with a payloader. They ended up having to soak the auger with water overnight to be able to pull it out!