Combines case ih headers

[John]

[No message]

 

[CRG]

Can you use the bracket for a oil drive woble box drive and install a john deere oil drive woble drive on a 1020 bean head that has a old style woble drive on itIJ The reason I want to know about the deere drive is I already have one available to me and would not need to purchase a caseih if it would work. The bottom bearing is shot on my old drive and I have it off to repair but might just replace it with the deere if I can.

 

[Trailtech]

Would like some feedback on Trailtech Header Transports also on Trailtech and Jantz Single and Double Combine Trailers.

 

[Trailtech]

Would like some feedback on Trailtech Header Transports also on Trailtech and Jantz Single and Double Combine Trailers.

 

[Big_Al]

I am looking to buy a 1020 Flex head and am wondering if there is anything I should be looking for. Also, what is the difference, weight wise, between the 30 ft. rigid and flex heads(I wonder if I have to revamp my header trailer)IJ

 

[chad]

we purchased a johnson grain saver for one of our platforms, after removing all the bolts from our platform to install i thought there has to be a simpler way, and cheaper. Found a cheaper and simpler way...use either a 1.5 or 2 inch thick wall pvc pipe and cut it into 5 foot sections have it set behind the sickle on top of the deck sheet, only need two brackets per 5 foot section. Cost is only $35 and 1.5 hrs. to put on. we took our johnson grainsaver off, and have the pipe on both platforms. any questions on how to build let me know.

 

[brian]

Was talking to someone about doing some sunflowers and they suggested an All Crop head. Has anybody else heard of such a head and if so what do they look like and how costly are theyIJ

 

[jth]

Wanted: corn head for old J.I Case 1660

 

[southpaw]

I was looking to buy a 25' 1020 flex head and was wondering

 

[OATS]

lOOKING AT A USED HEADER WITH A BENT AUGER HAS ANYONE HAD THEIR AUGER STRIGHTENED AND A NEW CENTER SECTION INSTAllEDIJ