Sikora
New member
- Messages
- 1
engine warm and running, loosen the nut till that rocker/lifter rattles, tighten until the noise stops, go a half turn by 1/4's, book says 1 full turn, have used the half for 40 years, works, wont rattle and wont burn a valve.I need help with how to adjust the valves on a 350 Chevy. I tried adjusting them, the plug wires are on the right way (I checked),but the engine keeps dying because it idles too roughly. There has to be a simple solution.
A vacuum leak will cause your engine to stall, With the engine running spray starting fluid on the vacuum hoses, if the engine RPM increases you've found your leak.I need help with how to adjust the valves on a 350 Chevy. I tried adjusting them, the plug wires are on the right way (I checked),but the engine keeps dying because it idles too roughly. There has to be a simple solution.