D
Guest
Suggest you go with the aftermarket Marlin blades and wear bars if you have feeding and growling problems. you can see them on loewen webb site.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Combines impeller blades
Forever_Red
Guest
Red, If you are thinking of trying a set of Marlin Ears, I have two sets, brand new- $280.00, used--$240.00,(600 acres soybeans). If interested, post on here so I can get in touch with you. located in NCIA.
red
Guest
I am not familiar with the Marlin's. And yes I have a problem with rice and tough stem beans feeding evenly with the rigid header I am using. What makes the marlin's feed betterIJ Forever how much on the marlin wear platesIJ, if you have a set.
robmgrig
Guest
I replaced mine with a rebuilt set from Estes manufacturing. They were rebuilt and hardfaced and much cheaper that a new set from Case IH. He has a site on the internet. Not sure what it is, but type it in a search engine. It doesn't cost much to ship them if you keep the package below 70 lbs. i think.
Forever_Red
Guest
Red, You have to understand the marlin ear is shorter than an oem ear. The wear plates will not interchange. The wear plate is a hardened material for extened wear. I don't know of a site where you could see a picture.
swede
Guest
Do a search for loewen Mfg.You should be able to find them.
red
Guest
rob, How long have you ran your rebuilt impeller blades from EstesIJ Did they also have the wear platesIJ or a kitIJ
still_galvanized
Guest
put new paddles on and turn the notches out. My R7 had impeller and only time i had trouble was with smooth side out. Very few problems with either R72's I cut mostly wheat and milo few beansand corn. Use the teeth!!!
Hunter
Guest
Thanks for the info. You said you cut milo what kind of set up do you use. Are your R72's hypernized , what bars do you runIJ I have troble with grain being carried out the rotor when cutting green milo. Thanks for any info
D
Guest
I will rebuild your Ears for $65.00 each and your ware plates for $45.00 each. You can find all my hard facing prices on the web at estesmfg.com . Call me and I will be glad to visit with you about all of my parts. Estes Mfg. Co. 800-235-4461 ask for Don