Hyper_Harvest_II
Guest
AGCO offers a kit to replace the end cap that stops the piston movement sooner and gives you about 12" more height. A less expensive way is to remove end cap and install a "black" 1 1_4" pipe coupling on top of piston and reinstall end cap. Cost about $2 and your time with the same results. We usually loosen the lower hyd. hose, remove upper hose and fitting.Weld a nut to top of end cap. Drive end cap down to remove round snap ring from groove.Use a slide hammer to remove end cap. Reassemble in reverse order. Hyper Harvest II