Combines 2388

Thanks for the post. Just reminds me of how good we have it when we are running the Gleaners.

I have been running Gleaners starting with an F in 1965 or 1966, Turned a new F over about 1968. Ran several F models, then for some reason bought a Massey 550 in the early 1970's, still trying to figure that one out. Went back to Gleaners in mid 1970's. I have an R50 now, first rotor combine, and I would not trade for anything else. I take alot of ribbing from the red and green boys, but they have been trading and my R50 still goes to the field. I think Gleaner has done a good job of keeping the farmer what he has asked for in a combine. I do get a little upset at parts cost and delivery, but the combines are good equipment. I think back at the F's and M's and do not remember a bad one. Never had an N or early R model. I like my Gleaner, poke all the fun you want.......

I agree I can't figure out why there are so many out there. I've heard some terrible things about the C - IH also. A custom harvester in my area that runs a Deere 9550 Sh tried a 2388. He runs some really steep hills and the ground was just yellow behind the Case. It also scared the

As with any CIH combine, check the ears, bars and concaves for wear and damage. The ears could be worn if they haven't been resurfaced. Check the hanger pipe to make sure it isn't bent. Test the concave adjustment motor function to make sure it isn't damaged. I'd make sure to run the serial n at a dealer to see if all the updates have been done, and check into getting the new style air intake if it doesn't have it.

Thanks for the info. What are some of the updates that should be doneIJ

It all depends on when the combine was manufactured- what mods need to be done. They periodically add little upgrades to the manufacturing line as they come up with them. Your dealer is the best source for this info- he can run the serial n and determine what it is eligible for- doesn't cost you anything to do the mods. I would think the dealers like it also, keeps the shop busy. My dealer likes it anyway. Some guys don't let their machines come near the service department for fear of spending money- these mods are what you miss out on if you don't take it in each year.

In Reply to: 2388 posted by P C on February 16, 2001 at 13:46:32: we have the wide firestones on our 2388. they are great for

The 30.5-32 bias tires on our 1480 are very bad about flat spots in cold weather. I would think radials shouldn't get flat spots because of their construction.

A 2388 will handle a 12 row head better than any 8820. As far as capacity goes, the 9650 and the 2388 will be close depending on conditions, but the Deere is better suited to handle the weight of the 12 row head.

For 2001 CaseIH has a 2388 12 row package available, but it has to be factory installed. However if your dealer don't have one on order you will not get one before fall. CaseIH production schedule is full for 2001.